i-Active AWD and G-Vectoring Work Together in New Mazda3


Implementing all-wheel drive is a technical challenge for any automaker, but it’s a special challenge for Mazda. Because Mazda makes the human driver the focus of every vehicle, it’s not enough to just drive all the wheels. Mazda’s all-wheel-drive system must enhance Jinba Ittai – the feeling of oneness between driver and vehicle.
 
Dave Coleman, vehicle development engineer at Mazda, is one of the people tasked with making that technology a reality. Recently Coleman took a few minutes to explain how the various systems work together in Mazda3.
 
i-Active AWD
 
"i-Activ all-wheel drive has been around for a while in the Mazda CX-3, CX-5 and CX-9 crossovers. It’s a sophisticated system that uses all the sensors in the car. We use the data we already have to understand what the road surface is like and then we can figure out exactly how much traction there is. For example, we can look at the windshield wipers. If they’re on, the car knows it’s raining. We can look at steering effort. If steering takes less effort, it means the road is slippery.
 
G-Vectoring Control
 
"G-Vectoring Control monitors the driver’s steering inputs. When the wheel turns, GVC shifts weight around very slightly to improve grip and make the car behave more naturally. If you’re accelerating and you try to steer, the car doesn’t respond quite as well as if you’re off the throttle. That happens because the car’s weight shifts forward onto the front tires when you’re off the throttle. G-Vectoring Control reduces the engine’s power output a little bit as you turn the wheel. That shifts weight onto the front tires to make Mazda vehicles respond more consistently."
 
Working Together
 
"The most exciting part is the way we’ve tied G-Vectoring Control into the i-Activ all-wheel drive system. If you have the front and rear wheels working together, all four wheels want to go the same speed. So the car naturally wants to go straight.
 
Here’s how we fix that problem: When you turn the steering wheel, Mazda3 decouples the rear wheels, so the car is easier to turn. Then as you start to straighten out again, the car couples the wheels up again to help pull the car straight.
 
Everything’s integrated now. When you turn the steering wheel, the car is turning the wheels. It’s also operating the engine, the brakes, and the all-wheel-drive system. It’s all based on what the driver is doing with the steering wheel. We’re getting harmonious interaction of all the different parts to make the car behave naturally."
Categories: Mazda3
/* ddcalmirc 05922752 */